|
|
GDS-3152 |
GDS-3154 |
GDS-3252 |
GDS-3254 |
GDS-3352 |
GDS-3354 |
|
Vertical |
|
Input Channels |
2Ch+EXT |
4Ch+EXT |
2Ch+EXT |
4Ch+EXT |
2Ch+EXT |
4Ch+EXT |
|
Bandwidth |
DC~150MHz(-3dB) |
DC~250MHz(-3dB) |
DC~350MHz(-3dB) |
|
Rise Time |
2.3ns |
1.4ns |
1ns |
|
Vertical Resolution |
8 bits |
|
Vertical Resolution@ 1MΩ |
2mV~5V/div |
|
Vertical Resolution@ 50/75Ω |
2mV~1V/div |
|
Input Coupling |
AC, DC, GND |
|
Input Impedance |
1MΩ// 16pF |
|
DC Gain Accuracy |
±(3% X |reading| + 0.1div+ 1mV) |
|
Polarity |
Normal and inverted |
|
Maximum Input Impedance @1MΩ |
300V (DC+AC peak), CAT I |
|
Maximum Input Impedance @50/75Ω |
5 Vrms ,CAT I |
|
OffsetPositionRange |
2mV/div ~ 100mV/div: ±0.5V
200mV/div ~ 5V/div: ±25V |
|
Bandwidth Limit |
20MHz (-3dB) |
100MHz (-3dB) |
200MHz (-3dB) |
|
Waveform Signal Processing |
Addition, Subtraction, multiplication, division, FFT, FFTrms |
|
Trigger |
|
Source |
Dual channel: CH1, CH2, Line, Ext ; 4 channel: CH1, CH2, CH3, CH4, Line, Ext |
|
Trigger Mode |
Auto (Auto (supports Roll Mode for 100 ms/div and slower), Normal, Single |
|
Trigger Type |
Edge, Pulse Width, Video, Runt, Rise & Fall, Alternative, Event-Delay (1~65,535) events, Time-Delay(10nS~10S), I2C, SPI, UART |
|
TriggerHold-off Range |
10ns~10s |
|
Coupling |
AC, DC, LF rej, HF rej, Noise rej |
|
Sensitivity |
DC~50MHz approx. 1div or 1.0mV
50MHz~150MHz approx. 1.5div or 15mV
150MHz~350MHz approx. 2div or 20mV |
|
EXT Trigger |
|
Range |
±15V |
|
Sensitivity |
DC~150MHz pprox.100mV
150MHz~250MHz approx. 150mV
250MHz~350MHz approx. 150mV |
|
Input Impedance |
1MΩ±3%, ~16pF |
|
Horizontal |
|
Range |
1ns/div~100s/div (1-2-5steps); ROLL: 100ms/div~100s/div |
|
Pre-Trigger |
10div maximum |
|
Post-Trigger |
1,000div |
|
Accuracy |
±20 ppm over any ≧1 ms time interval |
|
Signal Acquisition System |
|
Real Time Sample Rate |
2.5GSa/s |
5GSa/s |
2.5GSa/s |
5GSa/s |
5GSa/s |
5GSa/s |
|
Equivalent Time Sample Rate |
100GSa/s maximum for all models |
|
Record Length |
25k points |
|
Acquisition Mode |
Normal, Average, Peak Detect, High resolution, Single |
|
|
Normal: Acquire sampled values |
|
|
Average: From 2 to 256 waveforms included in average |
|
|
Peak Detect: Catches glitches as narrow as 2ns at all sweep speeds |
|
|
Hi Res: Real-time boxcar averaging reduces random noise and increases vertical resolution |
|
X-Y Mode |
|
X-axis input |
Channel 1; Channel 3 |
|
Y-axis input |
Channel 2; Channel 4 |
|
Phase Shift |
±3° at 100kHz |
|
Cursors and Measurement |
|
Cursors |
Amplitude, Time, Gating available |
|
Automatic Measurement |
28 sets: Vpp, Vamp, Vavg, Vrms, Vhi, Vlo, Vmax, Vmin, Rise Preshoot/ Overshoot, Fall Preshoot/Overshoot, Freq, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle, Phase, eight different delay measurements (FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF) |
|
Cursors Measurement |
∆V, ∆T |
|
Auto Counter |
6digits, range from 2Hz minimum to the rated bandwidth |
|
Power Measurements (optional) |
|
Power Quality Measurements |
VRMS, V Crest Factor, Frequency, IRMS, I Crest Factor, True Power, Apparent Power, Reactive Power, Power Factor, Phase Angle. |
|
Harmonics |
Freq, Mag, Mag rms, Phase, THD-F, THD-R, RMS |
|
Ripple Measurements |
Vripple, Iripple |
|
In-rush Current |
First peak, second peak |
|
Control Panel Functions |
|
Autoset |
Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo autoset |
|
Auto-Range |
Allows users to quickly move from test point to test point without having to reset the oscilloscope for each test point |
|
Save Setup |
20 sets |
|
Save Waveform |
24 sets |
|
Display System |
|
TFT LCD |
8" TFT LCD SVGA color display (LED backlight) |
|
Display Resolution |
800 horizontal × 600 vertical (SVGA) |
|
Interpolation |
Sin(x)/x and equivalent time sampling |
|
Waveform Display |
Dots, Vectors, Variable persistence, infinite persistence |
|
Display Graticule |
8 x 10 divisions |
|
Display Brightness |
Adjustable |
|
Interface |
|
RS-232C port |
DB-9port |
|
USB port |
2 sets USB 2.0 high-speed host port; 1setUSB 2.0 high speed device port |
|
Ethernet |
RJ-45 port, 10/100Mbps |
|
VGAVideoPort |
DB-15port, SVGA monitor output |
|
Line Output |
3.5mm stereo output jack for Go/NoGo audio alarm |
|
GPIB(Optional) |
USB to GPIB converter |
|
Go/NoGo BNC |
Maximum 5V /10mA TTL open collector ouput |
|
Kensington Style Lock |
Rear panel security slot connects to standard Kensington style lock |
|
Power Source |
|
LineVoltageRange |
AC 100V ~ 240V, 48Hz ~ 63Hz, Auto selection |
|
Miscellaneous |
|
Multi-language Menu |
Available |
|
On-line Help |
Available |
|
Time clock |
Time and Data ,Provide the Data/Time for saved data |
|
Dimensions and Weight |
400(W) x 200(H) x 130(D), approx. 4 kg. |